|
Marzocchi Forks
w/ 12' wheel
ON SALE Call for Pricing. This is the long awaited Marozocchi Inverted Shiver! This fork features: Inverted oil bath with 5" of fully adjustable travel Hydraulic disk brake system with fully adjustable brake lever 12" complete front wheel that is laced and has tube and tire installed! Fork guards Easy to install Bars not included PART# 2UP R-055 |
 |
||
|
Sano LT6
Long Travel 6 Fork
Call for Pricing. The Sano "ULTRA" long travel fork kits are the top of the line front suspension forks for minis. Fully adjustable, with six inches of travel, the ULTRA forks are exclusively manufactured for Sano and replace our ever-popular Bombshell forks. Made from T6-6061 aircraft grade aluminum, these forks are a pound lighter than stock and offer the utmost in plushness and handling. Completed with a CNC machined, Sanodized front hub and hydraulic front disc brake. Used by top riders and companies worldwide, these forks are worth the ching-ching and are ultra bling-bling. - Top and bottom Sanodized triple clamps - Top bar mounts - Full hydraulic front disc brake - 180mm rotor - CNC machined front hub - Fully sealed bearings in hub - Adjustable rebound dampening - 10 gauge, 10 inch spokes included - SANO MX handlebars are recommended - Optional 12 inch spokes available PART# 2UP R-056 |
 |
||
|
Sik50s Full
Suspension Kit $1,044.00 The SiK50 Full Suspension kit is a complete suspension system upgrade which includes: Front Suspension Custom designed billet aluminum upper & lower triple clamps Fork tubes (4" longer than stock) Billet aluminum 2 1/4 handlebar risers and bolts Fork stem Forks Front axle Front brake cable & guides Brake cable clip Rear Suspension Chromolly or Aluminum swingarm (2 longer than stock) Reverse chain adjusters Extended brake rod RK420 MXZ Gold Chain (not shown) Chain roller & spacer iShock with reservoir All necessary bolts and bushings PART# 2UP R-067 |
 |
||
|
Chromoly
Fork Leg Kit w/Disc Brake
$299.00 Our fork leg kit with disc is for those who want superb stopping powerup front along with stronger fork legs. Kit comes with: - 4130 Chromoly Legs - Hydraulic disc brake system - 1" longer than stock - Zinc plated - Long life bushings - 180mm front rotor - Hub adapter - Uses stock front hub - Easy installation - Parts can be purchased separately PART# 2UP R-057 |
 |
||
|
Chromoly
Fork Leg Kit
$179.00
Replace your stock and probably bent legs with our Sano legs. Way stronger and one inch longer than stock for a taller ride. This is one of our all time best sellers! Kit comes with: - 4130 Chromoly Legs - 1" longer than stock - Zinc plated - Long life bushings - Extended front brake cable - Uses stock front hub - Easy installation - Parts can be purchased separately PART# 2UP R-058 |
 |
||
|
Sik50s 1' Chromoly
Fork Tubes w Bushings
$169.00 For the adult CRF/XR50 pilot this kit is a must! Buy this combo and save This is one product you cant live without! The stock lowers are easy to bend when hitting a small jump or running into a rock or curb. With the Sik50's Chromoly lowers you can jump large gaps - hit those ruts, pot holes and curbs worry free of folding the stock lowers! Includes the No-Slop Fork Bushings Chromoly Fork Legs Heat Treated Dropouts Smooth finish Increases Bushing Life PART# 2UP R-064 |
 |
||
|
Marzocchi
Fork Seal Kit 35mm $40.00 Replacement seals for the Marzocchi front forks. PART# 2UP R-091 |
 |
||
|
Marzocchi CRF50 Fork Guards
$49.95 Protect those sweet forks. PART# 2UP R-092 |
 |
||
|
Hays
Brake Pads (1 pair)
$40.00 Hays Brake Pads Replacement pads for your Marzocchi front end. PART# 2UP R-093
|
 |
||
|
CRF50
Hayes Brake Upgrade Kit $185.99 PART# 2UP R-094 |
 |
||
|
BBR Rear Disc Brake Kit
Call for Pricing. Over 1 year in development, the BBR Rear Disc Brake Kit for the CRF/XR50 is finally here! We've destroyed hundreds of prototypes and trash canned every mountain bike brake made. We wouldn't sell it until it could hold up to the abuse the BBR race team dishes out. This is a real motorcycle brake developed from the ground up for the CRF/XR50. Super strong with unbelievable pedal "feel", this is the ultimate fix for your broken rear hub blues. PART# 2UP R-080 -Silver Hub -Black Hub |
 |
||
|
Sano Cradle
Mount Frame
$524.00 Maximize your fifty's handling with our new Factory Cradle mount frame. Broken motor mount cases are a thing of the past with this frame as it mounts in three critical motor mounting points, instead of the standard two. More unique perk about this frame is that it has a built in tank rise for added legroom, one inch extended neck for knee room and features a removable aluminum subframe. All these features are why we call it the Factory Frame. - Cradle mount increases motor mount strength and eliminates broken motor cases - 4130 chromoly - TIG welded - 1" longer head tube for added legroom. - Improved center of gravity - 1" Built in tank rise - Includes chromoly peg mount - Aluminum removable subframe - Complete with hardware and step-by-step instructions - Replacement subframes available - STOCK SWINGARM WILL NOT FIT! PART# 2UP R-059 -Black -Blue -White |
 |
||
|
BBR Perimeter Frame
Call for Pricing 6061 aluminum frame (100% designed, tested, machined, welded, and heat-treated in the USA) 1" longer than stock. 6061 aluminum swingarm (5" longer than stock) Frame includes footpeg mounts and lower motor mount. The motor is no longer used as a stress member of the frame! High quality BBR Supershock (by Elka) with adjustable rebound, compression, and preload. This shock is a work of art! Custom built specifically for BBR, it is fully rebuildable, and uses standard size valving shims. The giant shaft is 16mm. Custom wound spring. 8" of rear wheel travel. Single piece subframe loop (removable subframe). Uses stock CRF/XR50 rear axle, and chain adjusters (plus all the other CRF/XR50 components). Includes frame, swingarm, shock, gas tank, footpeg mounts, D-Section exhaust system, and BBR gas cap. PART# 2UP R-077 |
 |
||
|
Sano MX Swing Arm Kit
Call for Pricing The kit comes complete with 4130 chromoly frame that is one inch longer than stock and features a removable subframe and is available in white and black. The swingarm is 4.5 longer than stock and gives you 8 of rear travel. The MbVert shock details are listed below. The kit comes with a heavy duty Foot Peg Mount and all hardware needed to get you on the track. PART# 2UP R-108 |
 |
||
|
BBR Super Pro Frame
Call for Pricing. 6061 aluminum frame (100% designed, tested, machined, welded, and heat-treated in the USA) 1" longer than stock. 6061 aluminum swingarm (5" longer than stock) Frame includes footpeg mounts and lower motor mount. The motor is no longer used as a stress member of the frame! High quality BBR Supershock (by Elka) with adjustable rebound, compression, and preload. This shock is a work of art! Custom built specifically for BBR, it is fully rebuildable, and uses standard size valving shims. The giant shaft is 16mm. Custom wound spring. 8" of rear wheel travel. Same weight as stock frame, swingarm, and shock! (but 5 times stronger). Uses stock CRF/XR50 rear axle, and chain adjusters (plus all the other CRF/XR50 components). Frame, swingarm, and shock sold as set only! PART# 2UP R-078 |
|
||
|
Sik50s
Cradle Mount Frame
$449.00 King Racing USA is proud to the latest generation of frames, the Series 3 Cradle Mount Frame (a design so unique its patented). Manufactured by Billetware this is the ultimate chromoly frame for your little 50. Raised Ride Height Cradle eliminates cracking top motor mount Cradle eliminates busted Footpeg Mounts Increased Rigidity for better Stability and Control PART# 2UP R-068 |
 |
||
|
BBR SuperComp Adj. Billet Swingarm Call
for Pricing Unique BBR engineering with three (3) interchangeable "leverage-blocks" (soft, medium, stiff). Each leverage-block allows for a full range of rear suspension capabilities by controlling shock leverage ratios, giving the rider total control of rear suspension set-up for weight, ability, preference and track conditions. Once the chosen leverage-block is installed, the rider can adjust the shock for ultra-fine tuning. PART# 2UP R-079 |
 |
||
|
CAT5 CRF50 Engine
Cradle $119.00
Supports the engine and the rider. Reduces craked cases & ripped out footpegs. |
 |
||
|
Sano +2
Swing Arm $329.00 Sano Systems long travel swing arm is made from T6-6061 aircraft grade aluminum, is two inches longer than stock, nearly a pound lighter and way stronger. CNC machined "big-bike" chain adjusters, fully sealed bearings and completely Sano. Works with stock or aftermarket rear shocks. Fits '00-'07 XR/CRF 50. PART# 2UP R-060 -Silver -Raw |
 |
||
|
Sano +4
Swing Arm $349.00 Newly added to the Sano fifty arsenal, the plus four swingarm is a must if you plan to be a contender in the open 50 class. Added wheelbase and a taller ride are the benefits of this swingarm. - Plus four inches over stock - Fits '00-'03 XR 50's, '04-'07 CRF 50's - Includes all necessary hardware PART# 2UP R-061 -Silver -Raw |
 |
||
|
CHP Aluminum
Swing Arm
$199.00 With roller bearing pivots. 2 1/2 inches longer than your stock swing arm and half the weight. Softer ride and more travel for your rear end add up to more control for your CRF50 based bike at an affordable price. PART# 2UP R-069 |
 |
||
|
Fox Float
MXR Shock
$298.00 Ever heard the saying "smooth as silk"? Well that saying applies to your 50 after you slap this Fox Float shock on it. It was specifically developed for the harsh conditions a 50 shock goes through and has thus far met the demands of racers across the world. - Weighs only 1.1lbs - Easy installation - Adjust compression with an air pump (included) - Fits '00-'03 XR 50's, '04-'07 CRF 50's, TT-R 50 PART# 2UP R-062 |
 |
||
|
Elka Rear Shock
$345.95 The new Elka CRF/XR50 rear shock is the ultimate rear shock for the stock style frame and swingarm. Built from the highest quality materials, it is fully adjustable and ready for adult sized riders. Fully adjustable compression, rebound, and preload Piggyback reservoir Fits stock swingarm and most aftermarket stock style swingarms Body is CNC machined from billet aluminum Also available in light or heavy version (by special order) PART# 2UP R-082 |
 |
||
|
I-Shock
w/Reservoir $248.00 This shock also features a 10mm shaft, 260mm overall length and 80mm of shaft travel as well as: - Doubles rear wheel travel - from 3" to 6" - Raises ride height by 2" - Adjustable preload and rebound damping with reservoir - Engineered specifically for the Honda XR50 - Ideal for stock or extended swing arms - Hard anodized components - Utilizes stock hardware PART# 2UP R-063 |
 |
||
|
Sik50s H.D Springs for Stock Forks $34.00 Ideal for riders weighing more than 165lbs. Comes with complete installation instructions. PART# 2UP R-065 |
 |
||
|
Marzocchi CRF50
5.0 Fork Springs
$ PART# 2UP R-095
|
 |
||
|
Sik50s
Replacement Spring for Stock Rear Shock
$24.00 Stiffer rear spring, direct replacement for use with stock rear shock. PART# 2UP R-066 |
 |
||
|
Marzocchi
Fork Oil
$19.95
PART# 2UP R-096 |
 |
||
|
|
|||
