CRF 50 Accessories

2UP Brake Snake/Shifter Snake $8.00 Keep your Brake lever from bending, so that you can Rip the stickers off your competition. PART# 2UP R-002
2UP Minis # Plate for Mini Stand $20.00 Customize your own number and stickers! PART# 2UP R-003
2UP Stickers $1.00 each Nice! 2UPPPPPP Stix’z PART# 2UP R-028
2UP CRF50 Graphics Kit $69.95 Be just like one of the TEAM RIDERS with this 2up graphics kit stuck to your bike! Add $25.00 for Number plate decals. PART# 2UP R-070
Sik50s Engine/Cam Cover Kit $89.00 Here's a Sik way to stand apart from the rest of the crowd! Our Sik 3 piece Motor Dress Up Kit is a true work of art. Each piece is machined perfection and anodized in black. Includes the following: • Cam Cover • Heat Sink Cover • Rocker Arm Cover PART# 2UP R-004
Sano XR/CRF 50 Engine Dress-up Kit $99.95 Sanodize your motor and bike with this billet aluminum bolt-on kit that comes with four parts. Cam cover, head cover, oil cooler and dipstick. - T6 billet aluminum - Fits '00-'03 XR 50, '04-'07 CRF 50. PART# 2UP R-005 -Black -Blue -Red
Kitaco Magnetic Oil Drain Plug $14.99 Collects any debris that might be suspended in your oil system, thus eliminating the possibility of motor damage to vital moving parts. fits the Honda CRF50 and XR50 as well as the Kawasaki KLX110 and Suzuki DR-Z110. PART# 2UP R-009
CRF50/XR50 Plastics Kit $129.99 Fits CRF50, XR50, SDG SpeedMini, and Xtreme 107's. PART# 2UP R-007 -Black -White -Blue -Green -Orange -Red -Silver -Yellow
Aluminum Rims $99.95 & $104.95 Light weight and super strong. These rims add the finishing touch to your 50. Sizes:10" or 12" Colors:Gold, Black, Blue, Red PART# 2UP R-089
BBR CRF/XR50 Tall Seat Assembly $89.95 Complete replacement tall seat assembly for your CRF/XR50. Includes plastic seat base, perfectly shaped tall seat foam, and black non-slip seat cover. PART# 2UP R-085
Lightspeed Carbon Fiber Tank Cover $49.95 This carbon fiber cover mounts on the stock tank (also available for the BBR Perimeter 50 gas tank) for protection. Also it gives a trick works look to the stock tank. PART# 2UP R-097
BBR Billet Gas Cap $69.95 CNC machined billet aluminum gas cap is available for most Japanese off-road motorcycles. • Billet machined 6061-T6 aluminum gas cap with a gold anodized center section with a gas resistant rubber seal. • Large palm grip body for easy spin on and off. • Tapered seal surface to prevent fuel leaks. PART# 2UP R-083
CHP Billet Aluminum Fuel Cap/Vent $29.50 Machined out of 6061 T6 aluminum. Available in four colors. Clean and Smooth design with incorporated gripper notches and matching billet vent cap. PART# 2UP R-008 -Red -Blue -Silver ck
Sano Billet Gas Cap $59.95 Our billet gas caps fit many bikes and come Sanodized. Etched with the Sano logo, keep the gas in your tank with style. PART# 2UP R-010 -Black -Red -Silver -Blue
Sik50s Billet Gas Cap $59.99 Billet aluminum gas cap with laser engraved logo. Direct replacement for stock gas cap. PART# 2UP R-006 -Black
Sik50s Gas Cap Breather Vent $14.99 Billet gas cap breather are not only functional but a great way to bling out your bike! Includes short hose. PART# 2UP R-011 -Black -Silver -Red -Blue -Yellow
Sik50s Skull Footpegs $99.99 Anodized black or red with Sik50s Skull logo. These thing are Sik! Works with stock or aftermarket footpeg mount. PART# 2UP R-012 -Black -Red
Billetware Footpegs $89.00 Billet aluminum footpegs with high grip design. Works with stock or aftermarket footpeg mount. PART# 2UP R-028 -Black -Blue -Red
Sano Systems Billet Footpegs $99.95 Made from 6061 billet aluminum, the System F pegs are much wider, stronger and lighter than stock pegs for a more comfortable and controlled ride. With the stock mounting dimensions, they fit on all XR and CRF 50's. - T6 6061 billet aluminum PART# 2UP R-013 -Black
CHP Billet Aluminum Footpegs $75.00 Billet aluminum with our unique new gripper diamond design. PART# 2UP R-014 -Red -Aluminum
CHP Footpeg Mount $99.95 Comes with kickstand. Moves your footpegs backwards 1", thus giving you more room for the larger rider. PART# 2UP R-017
Sano Footpeg Mount $99.95 Tired of saggy foot pegs and bent mounts? These 4130 chromoly peg mounts are way stronger than stock and will keep your pegs in the right position so you can moto forever. - Zinc-Plated in Silver to match your motor and frame. - Can use stock pegs and mounting hardware or upgrade to Sano billet footpegs. Fits CRF50 & 70 PART# 2UP R-016
Sik50s Footpeg Mount $99.99 Heavy duty, chromoly footpeg mount, powder coated. PART# 2UP R-015
Sik50s Carbon Fiber Glide Plate $89.99 Carbon fiber skid plate -- bolts right on to your CRF50/XR50 or XR70. PART# 2UP R-018
Sik50s Glide Plate $79.99 Aluminum glide plate protects the engine from damage when jumping your bike. Bolts right on! PART# 2UP R-029
CHP Skid Plate $75.00 Aluminum for cylinders with mounting tabs. One Solid Piece with absolutely no welds. Super strong and a perfect fit. PART# 2UP R-019
Sano Skid Plate $59.95 A necessary investment to protect your mini racers' motor. If you case a supercross double or ride on rocky trails, your motor is fully protected and you can keep on motoring. - Lightweight aluminum - Sanodized finish - A must for engine protection - All hardware included - Available in silver, red and black - Made in the USA PART# 2UP R-020
BBR Billet Aluminum Brake Pedal $149.95 CNC machined billet aluminum brake pedal for the CRF/XR50. Beautifully machined from a solid block of aluminum with a bolt on mount for the drum brake rod. Includes replaceable red tip. Works with OEM Honda frame, BBR Aluminum Frame, BBR Super Pro frame, BBR Perimeter frame, and many aftermarket frames for the CRF/XR50. PART# 2UP R-087
Sano Billet Rear Brake Pedal $109.95 No more bent brake pedals with this new Sano billet brake pedal. At 1" longer than stock, you can now brake comfortably with the added room and grip the tip offers. Made out of 6061 aircraft aluminum - 1 Inch longer than stock - Fits '00-'07 CRF/XR 50. PART# 2UP R-022
Sik50s Extended Brake Lever $49.99 -1 inch longer than stock -Powdercoated black -Aggressive Teeth on footpedal PART# 2UP R-021
BBR Aluminum Folding Shift Lever $39.95 Folding tip, forged aluminum shift lever from BBR Motorsports. Stronger and lighter than the stock shift lever, with a beautiful anodized (titanium color) finish. PART# 2UP R-084
Sik50s Flex Shift Lever $32.99 Tired of your bent stock shift lever? This unit out performs the stocker with a pivoting shift tip to prevent bending and costly motor damage. Fits the following: • Honda CRF/XR50 • Honda CRF/XR70 • Yamaha TT-R50 PART# 2UP R-023
CHP Aluminum Shifter $17.95 Spring loaded tip. Knurled aluminum spring loaded shifter tip 1 inch longer than stock and absolutely beautiful construction. PART# 2UP R-024
TAG Mini Play Bars with Pad $79.95 Specifically designed and manufactured for the pit bike industry. Run the BEST bar on the market, no excuses! PART# 2UP R-027 -Silver -Red -Black -Blue
Sano MX Bar Kit $249.95 Our MX bar kits come complete with: - Sano mini MX bars: black - Sano System billet aluminum throttle: not plastic!! - CNC machined aluminum bar clamp - Black TAG Grips - Extended front brake cable - Front brake ever - Kits available in black or red (clamp and throttle color) PART# 2UP R-025 -Black -Red
BBR Handlebar Kit $199.95 Raises the handlebars for adult back-yard racing. The only kit available with all necessary parts. • Gold or Black anodized, CNC machined, billet aluminum top clamp • Chrome-moly 8” rise handlebar • Front brake lever with long cable • Standard turn throttle with long cable and custom carb top (stock carb) • “CR” type kill button with long length wires • BBR crossbar pad and BBR grips • Grip glue, instructions, and 6mm hex key wrench included. PART# 2UP R-081
Sik50s MX Handlebar Kit $224.99 -Billet aluminum MX bar clamp -Mini MX bars -Throttle assembly with cable -Brake lever, perch and cable -Kill switch PART# 2UP R-026
D.I.D Mini MX 420x120 Gold Chain $34.95 D.I.D ER chain is designed exclusively for racing. D.I.D's exclusive DHA pin treatment is the secret behind the superior performance PART# 2UP R-072
BBR Cable Guide $8.95 Molded black plastic cable guide fits most bikes by drilling the front number plate. PART# 2UP R-105
2UP Throttle Cable $19.95 -Stock Cable -18/20 mm -24/26 mm PART# 2UP R-102
Hays Hydraulic Front Brake Line $40.00 PART# 2UP R-101
Formula Hydraulic Front Brake Line $40.00 PART# 2UP R-100
Formula Brake Spring Clip $10.00 PART# 2UP R-106		No Picture
Joker Machine Billet Throttle $189.95 Joker Machine® Billet Throttles CNC machined billet throttle body and tube. Whirl pool design with clear window. PART# 2UP R-073 -Red -Blue -Black -Gold
Joker Machine Throttle Cable $19.95 Joker Machine Throttle Cable has two different fits. one fits the 26 or 28mm carb and the other fits the stock carb. PART# 2UP R-074
Counter Sprocket $14.00 With locking plate. -15T -16T PART# 2UP R-050
Cold Fusion Sprocket $44.95 CRF50 & XR50 Sprocket Sizes:-34 –35 –36 –37 PART# 2UP R-075
Sik50s Rear Sprocket $39.99 CRF50 & XR50 Sprocket Billet aluminum Sizes:-34 –35 –36 –37 -38 PART# 2UP R-076
BBR 10" Aluminum Bike Stand $54.95 Silver aluminum motorcycle stand. Perfectly sized for your CRF/XR50 and other mini bikes! PART# 2UP R-088
BBR CRF/XR50 Spoke Wrench $7.95 Forged and triple chrome plated, this spoke wrench will look right at home next to the finest tools made. One end fits the stock CRF/XR50 spoke nipples and the other end fits our heavy duty spoke sets. PART# 2UP R-090
CRF50 Accessories Page Order line - 703-732-RIDE MON-SAT 9-5 est

Cold Fusion Sprocket $44.95

CRF50 & XR50 Sprocket

Sizes:-34 –35 –36 –37

PART# 2UP R-075

Sik50s Rear Sprocket $39.99

CRF50 & XR50 Sprocket

Billet aluminum

Sizes:-34 –35 –36 –37 -38

PART# 2UP R-076