|
Marzocchi
Forks w/14' Wheel ON
SALE Call for Pricing This is the long awaited Marozocchi Inverted Shiver! This fork features: Inverted oil bath with 6" of fully adjustable travel Hydraulic disk brake system with fully adjustable brake lever 12" complete front wheel that is laced and has tube and tire installed! Fork guards Easy to install Bars not included PART# 2UP G-044 |
 |
||
|
BBR Perimeter Frame
Call
for Pricing 6061 aluminum frame (100% designed, tested, machined, welded, and heat-treated in the USA) 6061 aluminum swingarm (2.5" longer than stock) Integrated footpeg mounts and lower motor mount (the motor is no longer used as a stress member of the frame!) High quality BBR SuperShock (by Elka) with adjustable rebound, compression, and preload. This shock is a work of art! Custom built specifically for BBR, it is fully rebuildable, and uses standard size valving shims. The giant shaft is 16mm. Custom wound spring. 8" of rear wheel travel .Uses stock KLX/DRZ110 rear axle (plus all the other KLX/DRZ110 components) Includes frame, swingarm, shock, gas tank, footpeg mounts, brake pedal, side panels, chain guide, D-Section exhaust system, and BBR gas cap. PART# 2UP G-093 |
 |
||
|
CAT5 110 Engine
Cradle $125.00
Supports the engine and the rider. Reduces craked cases & ripped out footpegs. |
|
||
|
BBR SuperComp Adjustable
Billet Swingarm Call
for Pricing Unique BBR engineering with three (3) interchangeable "leverage-blocks" (soft, medium, stiff). Each leverage-block allows for a full range of rear suspension capabilities by controlling shock leverage ratios, giving the rider total control of rear suspension set-up for weight, ability, preference and track conditions. Once the chosen leverage-block is installed, the rider can adjust the shock for ultra-fine tuning. PART# 2UP G-094 |
 |
||
|
Sano KLX 110
Long Travel Swingarm
$359.00 Sano Systems KLX/ DRZ 110 long travel swingarm is made from T6-6061 aircraft grade aluminum. It is nearly a pound lighter and way stronger than stock. CNC machined "big-bike" chain adjusters, fully sealed bearings and completely Sano. Works with stock or aftermarket rear shocks. - Made in the USA PART# 2UP G-058 |
 |
||
|
CHP
Privateer Swingarm Kit
$1,115.00 This Swingarm has a remote reservoir shock up-grade. The Kit contains our custom manufactured ELKA shock, specifically designed for our suspension. PART# 2UP G-041 |
 |
||
|
Sik110s 3
inch Extended Aluminum Swingarm
$349.99 Fabricated from 6061 T6 heat-treated alloy, our strong, lightweight swingarm is a combination of 1" x 2" tubing and slip fit precision. CNC machined billet ends for maximum strength. It's all TIG welded in solid jigs. We've included sealed bearings and stainless steel spacers for long life. The swingarm ships with a custom heavy-duty chain wear slider. PART# 2UP G-042 -Black |
 |
||
|
BBR Rear Disc Brake Kit
Call for Pricing BBR Engineered and purpose-built, this disc brake kit is a scaled down big bike motorcycle brake system. Featuring a billet one-piece hub with massive bearings, thick rotor, and full-floating caliper, this brake system is ready to handle the highest horsepower minis on the planet. Hub is 36 hole design for use with KLX/DRZ110 rims. Optional adapter kit required for stock type frames. PART# 2UP G-095 -Silver Hub -Black Hub |
 |
||
|
TAG Mini
Play Bars with Pad $79.95 Specifically designed and manufactured for the pit bike industry. Run the BEST bar on the market, no excuses! PART# 2UP G-045 -Black -Red -Blue Silver |
 |
||
|
This newly designed handlebar kit provides more leg room with added rider comfort and stability by raising the hand position 1.5 and moving it forward 1. This bar kit makes it easier to move around and enables easy transition from sitting to standing which improves bike control and boosts your ability to ride difficult terrain. PART# 2UP G-099 |
 |
||
|
Marzocchi
Fork Seal Kit 35mm $40.00 Replacement seals for the Marzocchi front forks. PART# 2UP G-082 |
 |
||
|
Marzocchi
KLX110 Fork Guards $49.95 Protect those sweet forks. PART# 2UP G-086 |
 |
||
|
CHP Steering Bearing Up Grade Kit
$39.95
|
 |
||
|
CHP Pivot Up
Grade Kit $44.20 Needle Bearing kit for your stock KLX SWING ARM. Up grade your stock cheap rubber swing arm bushings with our Pivot upgrade kit. Insures that you swing arm stays in perfect alignment with frame. Eliminates torque and distortion of your rear wheel. |
 |
||
|
BBR
Tall Seat Assembly
$89.95 Complete replacement tall seat assembly for your KLX/DRZ. Includes plastic seat base, perfectly shaped tall seat foam, and black non-slip seat cover. PART# 2UP G-096 |
 |
||
|
Sik110s
Replacement Spring for Stock Forks
$79.99 Stiffer fork springs, direct replacement for use with stock forks. |
 |
||
|
Marzocchi KLX110
5.0 Fork Springs
$
PART# 2UP G-089
|
 |
||
|
Sik110s
Replacement Spring for Stock Rear Shock
$79.99 Stiffer rear spring. Direct replacement for use with stock rear shock. PART# 2UP G-048 -Black |
 |
||
|
Marzocchi Fork Oil
$19.95
Keep that oil changed! PART# 2UPG-090 |
|
||
|
KLX 110 FOX
Float MXR Shock
$299.99 Ever heard the saying "smooth as silk"? Well that saying applies to your 50 after you slap this Fox Float shock on it. It was specifically developed for the harsh conditions a 50 shock goes through and has thus far met the demands of racers across the world. - Weighs only 1.1lbs - Easy installation - Adjust compression with an air pump (included) PART# 2UP G-057 |
 |
||
|
Elka Remote Shock
for Bigminis Pro Swingarm w/ Adjustable High Speed Compression and
Rebound $499.95 Elka Nitrogen Shock with Remote Reservoir shock absorber features a very progressive travel with adjustable preload, compression and rebound. ONLY works with the Bigminis Swingarm Kit. PART# G-077 |
 |
||
|
iShock
Extended Rear Shock $314.99
The Mb series KLX/DRZ 110 Extended iShock features black and hard anodizing throughout for increased durability. The 14mm Chromoly shaft and "big bike" type valving set a new industry standard for pit bike performance suspension. By increasing travel, ride height and the addition of adjustability features, it's clear why iShock is the intelligent choice. Installation is a breeze and all shocks utilize the stock hardware. MB KLX/DRZ 110 Extended iShock benefits at a glance: · Adjustable Preload and rebound dampening for unparalleled adjustability. · Ideal for stock or extended swing arms · Optional spring rates available · Hard anodized components · 14mm Chromoly shaft · Raises ride height. · Works great for bike with extended front ends. PART# 2UP G-043 |
 |
||
|
Bigminis "Stage 1"
Pro KLX/DRZ110 Swingarm Kit "On Sale Now"
Call for Pricing. Pro Swingarm Kit KLX/DRZ110 Bigminis CNC Billet Pro Swingarm is 3 Longer Than Stock Exclusive 4 Position Eccentric Shock Tower (adjust ride height from stock to pro front end level) Elka Shock W/Adjustable Pre Load , Rebond Valving (exclusive for the Bigminis Swingarm) 8 Of Rear Wheel Travel with stock wheel adapter Not Shown Bigminis Sharkphinn Chain Guide Chain Roller CNC Cut Chain Buffer ( for perfect fit to swingarm ) Bigminis Steel Axle Blocks Note: Bigminis Pro Swingarm will work with Stock Rear Wheel or KX-60 Rear Wheel or Bigminis Pro Rear Wheel Kit. Standard Spring and valving will support riders that are 130-165 lbs lighter/heavier riders will need different spring and valving for additional charge of $89.95. Standard Spring (130-165lb) Light Spring (100-130lb) Add $89.95 Heavy Spring (165-200lb) Add $89.95 PART# G-071 -Black -Silver
|
 |
||
|
Bigminis "Stage 2"
Pro KLX/DRZ110 Swingarm Kit
Call for Pricing Pro Swingarm Kit KLX/DRZ110 Bigminis CNC Billet Pro Swingarm is 3 Longer Than Stock Exclusive 4 Position Eccentric Shock Tower (adjust ride height from stock to pro front end level) Elka Shock W/Adjustable Pre Load , Compression & Rebond Valving (exclusive for the Bigminis Swingarm) 8 Of Rear Wheel Travel Bigminis Sharkphinn Chain Guide Chain Roller CNC Cut Chain Buffer ( for perfect fit to swingarm ) CNC Billet Red Anodized Axle Blocks 17-4 Stainless Steel Rockwell 42 Heat Treated Axle Note: Bigminis Pro Swingarm will work with Stock Rear Wheel or KX-60 Rear Wheel or Bigminis Pro Rear Wheel Kit. Standard Spring and valving will support riders that are 130-165 lbs lighter/heavier riders will need different spring and valving for additional charge of $89.95.
Standard Spring
(130-165lb)
PART# G-072
|
 |
||
|
Bigminis "Stage 3"
Pro KLX/DRZ110 Swingarm Kit
Call for Pricing
Pro Swingarm Kit KLX/DRZ110 Bigminis CNC Billet Pro Swingarm is 3 Longer Than Stock Exclusive 4 Position Eccentric Shock Tower (adjust ride height from stock to pro front end level) Elka Shock W/Adjustable Pre Load , Compression & Rebond Valving (exclusive for the Bigminis Swingarm) 8 Of Rear Wheel Travel Bigminis Sharkphinn Chain Guide Chain Roller CNC Cut Chain Buffer ( for perfect fit to swingarm ) CNC Billet Red Anodized Axle Blocks 17-4 Stainless Steel Rockwell 42 Heat Treated Axle Note: Bigminis Pro Swingarm will work with Stock Rear Wheel or KX-60 Rear Wheel or Bigminis Pro Rear Wheel Kit.Standard Spring and valving will support riders that are 130-165 lbs lighter/heavier riders will need different spring and valving for additional charge of $89.95. Also includes Rear Wheel Kit
Standard Spring (130-165lb)
|
 |
||
|
Bigminis KLX/DRZ110
Pro Rear Wheel/Disc Brake Kit
Call for Pricing Bigminis Pro Rear Wheel ( billet hub, stainless steel spokes, black anodized 12 alloy rim) Disc Brake Master Cylinder Master Cylinder Mount Brake Line Disc Break Caliper CNC Billet Caliper Mount 160mm Disc Rotor Master Cylinder Clevis CNC Stainless Steel Wheel Spacer And All Mounting Hardwear. Note: Wheel kit does not come with rim lock or sprocket.(Hub accepts XR-50 sprocket) PART# G-074 |
 |
||
|
Bigminis Pro
Swingarm "Stock Rear Wheel" Adapter
$59.95 Stock Rear Wheel Adapter for Bigminis Pro Swingarm! PART# G-075 |
 |
||
|
Formula Brake Pads (1 pair)
$40.00 |
 |
||
|
Hays
Brake Pads (1 pair) $40.00 Hays Brake Pads Replacement pads for your Marzocchi front end. PART# 2UP G-087
|
 |
||
|
KLX 110
Hayes Brake Upgrade Kit $185.99
PART# 2UP G-088
|
 |
||
|
KLX110
Suspension Page |
|||